Author | Thread |
User 03.05.2007 06:03:04 |
This posting is older than 6 months and can contain outdated information. Some humble suggestions: the RB menu is way too complicated. When I hit menu it brings up the screen showing me which application is being controlled, and what each button does on the remote. I have to press another button to get around to doing anything useful, like go to the menu I've set up in my profile. What if I already know what the buttons do? That screen is superfluous; there should be an option in the preferences to turn it off and go straight to the main menu. Also: in the 'menu' preference screen, if I hit the 'plus' under my profile, it creates a folder that I can rename. That folder then appears in my menu. But I can only put elements and actions from the left side into that folder. Why not allow users to point that folder to a real folder... then they could set up their own smart folders in the finder and use them as they see fit, rather than rely on the few available on the left. Likewise: in the 'behaviours' tab, I can create a custom action to be assigned to a button press; but in the 'menu' tab I cannot. Why? (It now occurs to me that this issue may well encompass the last one.) Finally, and this is maybe quibbling, but I'll mention it anyway: the iTunes music browser is very nice, but iTunes now does movies, TV shows and podcasts, among other things... the RB music browser seems based on iTunes 4, with only artist, album, playlist, track. It would be nice if the browser worked with these other media as well as music.
| These entries from the FAQ may be relevant to this topic: Behaviours
You can create your own Behaviours with the Behaviour Construction Kit. A video on the Remote Buddy website provides you with an overview and step by step instructions.
You can also find step by step instructions in the Remote Buddy Help under "How Tos". You can access the Help via Remote Buddy's icon in the menu bar and via the support area of this website.
There are several possible error sources:
- The application has been installed after Remote Buddy has already been launched
For efficiency reasons, Remote Buddy only searches for supported applications when its started. If you have installed an application after launching Remote Buddy, please quit Remote Buddy and launch it anew.
- Oudated program versions
The installed version of the program in question could be outdated and identify itself with a different Bundle Identifier than the version supported by Remote Buddy. This problem often occurs with Mplayer OS X. The most recent version of that application is not to be found on Sourceforge but on directly on the pages of Mplayer HQ.
- Custom menus
If you use a custom menu in Remote Buddy and you don't make use of Remote Buddy's smart folders, the menu structure is static. You have to manually add the behaviour into a place of your choice in the menu.
- The behaviour is deactivated.
Make sure, the checkbox in front of the Behaviour's name in the Mappings pane of the preferences is active.
- The Launch Services database is outdated.
Remote Buddy uses Launch Services to check for the availability of an application on your Mac. If the Launch Services database of OS X is incomplete or outdated, so is Remote Buddy's dynamically created menu. The solution, though is easy. Download LSRefresh, launch it, select the application(s) that don't turn up in Remote Buddy's menu, wait until the update is finished and then restart Remote Buddy.
Configuration 1) Open the Remote Buddy Preferences via the pulldown-menu and choose "Mapping".
2) Choose the mapping you want to modify.
3) Select "Custom actions" for the button you want to map to an action of your own.
4) Create the action you need using the appearing editor.
Hardware - Apple® Remote
To enable you to use all capabilities of the IR Receiver of your Mac®, Remote Buddy is using its own driver. In contrast, all other applications with integrated Apple® Remote support usually use the OS X Apple® Remote subsystem.
As long as you're running Remote Buddy, Remote Buddy and its driver are responsible for turning the received button presses into actions. As soon as you quit Remote Buddy, this task is again handled by the OS X Apple® Remote subsystem.
If other applications don't use the interface to the OS X Apple® Remote subsystem correctly, this can lead to the effect that nothing happens when you press a button on your Apple® Remote. For as long as you're running Remote Buddy, issues like this are covered by Remote Buddy and it's driver and are therefore not visible to you. However, as soon as you quit Remote Buddy, the OS X Apple® Remote subsystem is back in control and any issues caused in it by other applications become visible.
Therefore Remote Buddy is neither the cause of the issue nor is it responsible for it. Instead, the cause of the issue exists independently of Remote Buddy. It's located elsewhere and can also only be solved there.
Although our products can't cause any such issues, we're regularly contacted about such issues and asked for help. In order to make locating and fixing the cause of such issues as easy and efficient as possible, we've developed a free diagnostics tool: Remote Control Diagnostics. It can locate issues with a single click and will provide you with information about the issue as well as with instructions on how you can fix it.
Hardware - Harmony® Smart Control
The table that follows lists the commands the Harmony software assigns to the respective buttons by default - and how these need to be changed for Remote Buddy. For Remote Buddy, the commands for short and long button presses should always be identical.
Button |
Harmony Default: Short |
Harmony Default: Long |
Adapted for Remote Buddy: short & long |
Rewind |
ScanPrev |
Prev |
ScanPrev |
Fast Forward |
ScanNext |
ScanNext |
ScanNext |
Play |
Play |
Play |
Play |
Pause |
Pause |
Pause |
Pause |
Record |
- |
- |
Circle |
Stop |
Stop |
Eject |
Stop |
Red |
Red |
Red |
Red |
Green |
Green |
Green |
Green |
Yellow |
Yellow |
Yellow |
Yellow |
Blue |
Blue |
Blue |
Blue |
DVR |
- |
- |
Triangle |
Guide |
- |
- |
TopMenu |
Info |
- |
- |
Display |
Exit |
- |
- |
InstantLeft |
Vol + |
- |
- |
L1 |
Vol - |
- |
- |
L2 |
Mute |
- |
- |
L3 |
Menu |
Popup/Menu |
Popup/Menu |
Popup/Menu |
Ch/Pg + |
ChannelUp |
ChannelUp |
ChannelUp |
Ch/Pg - |
ChannelDown |
ChannelDown |
ChannelDown |
Return |
Return |
Return |
Return |
Left |
DirectionLeft |
DirectionLeft |
DirectionLeft |
Right |
DirectionRight |
DirectionRight |
DirectionRight |
Up |
DirectionUp |
DirectionUp |
DirectionUp |
Down |
DirectionDown |
DirectionDown |
DirectionDown |
OK |
Enter |
Enter |
Enter |
0-9 |
0-9 |
0-9 |
0-9 |
.- |
-/-- |
-/-- |
-/-- |
E |
- |
- |
InstantRight |
Here's where and how you can make the changes:
Unlocking all buttons of the Smart Control Show
Please verify that no power saving options are enabled at "Remote Buddy > Preferences > Hardware > Bluetooth Receiver".
| Thread-display::- great, but..., User, 03.05.2007 06:03:04
|
|