There are several possible error sources:

• The application has been installed after Remote Buddy has already been launched

  For efficiency reasons, Remote Buddy only searches for supported applications when its started. If you have installed an application after launching Remote Buddy, please quit Remote Buddy and launch it anew.

• Oudated program versions

  The installed version of the program in question could be outdated and identify itself with a different Bundle Identifier than the version supported by Remote Buddy. This problem often occurs with Mplayer OS X. The most recent version of that application is not to be found on Sourceforge but on directly on the pages of Mplayer HQ.

• Custom menus

  If you use a custom menu in Remote Buddy and you don't make use of Remote Buddy's smart folders, the menu structure is static. You have to manually add the behaviour into a place of your choice in the menu.

• The behaviour is deactivated.

  Make sure, the checkbox in front of the Behaviour's name in the Mappings pane of the preferences is active.

• The Launch Services database is outdated.

  Remote Buddy uses Launch Services to check for the availability of an application on your Mac. If the Launch Services database of OS X is incomplete or outdated, so is Remote Buddy's dynamically created menu. The solution, though is easy. Download LSRefresh, launch it, select the application(s) that don't turn up in Remote Buddy's menu, wait until the update is finished and then restart Remote Buddy.

• Please make sure you have the latest version of Remote Buddy installed. If in doubt, download the latest version, quit Remote Buddy, delete it, empty your trash, then copy the downloaded version of Remote Buddy to your harddrive and start it from there.
• Please make sure, that you have installed the latest version of the Remote Buddy drivers. You can install the drivers using the Setup Wizard (=> access it via the Remote Buddy pulldown menu).
• Check your Remote Buddy settings in the Hardware category. Your remote control should be listed there and the lamp next to it should be green. If you don't find your remote control there, either the Remote Buddy drivers were not installed or installed in an outdated version - or - there is a general problem with the device. For USB devices, plugging the device to another port or resetting the PMU and/or SMC-unit of your Mac® (=> find guides on how to do this for your Mac® in the support area of apple.com) may help. If you can't find it under "USB" in the System Profiler (=> /Applications/Utilities) either, a hardware defect is as well possible.
• Check the batteries of your remote control.
• If your remote control has an on/off switch: make sure that your remote control is switched on.
• If your remote control requires additional receiver hardware: make sure that it is correctly attached to your computer and that it turns up in System Profiler.
• If you use an Apple® Remote, you should also check your system settings. Quit Remote Buddy, then open System Preferences.app > Security. Please make sure that the option to disable the infrared receiver is NOT active and click on "Unpair" should you have paired your Apple® Remote with your Mac®. After that, start Remote Buddy. If your Apple® Remote still doesn't work with Remote Buddy, please also check its preferences for the Apple® Remote. They can be found at Preferences > Hardware > Built-in IR receiver. If support for multiple remote controls is enabled there, ensure that your remote control is checked in the right table (=> you can find the correct entry for your remote control by pressing a button on it).
• If you are using a Keyspan™ RF Remote for Front Row, re-pair its remote control and receiver by simultaneously pressing the small knob on the back of the remote control and the knob on the receiver stick (the knob looks like the blinking LED, except it does not blink).

To enable you to use all capabilities of the IR Receiver of your Mac®, Remote Buddy is using its own driver. In contrast, all other applications with integrated Apple® Remote support usually use the OS X Apple® Remote subsystem.

As long as you're running Remote Buddy, Remote Buddy and its driver are responsible for turning the received button presses into actions. As soon as you quit Remote Buddy, this task is again handled by the OS X Apple® Remote subsystem.

If other applications don't use the interface to the OS X Apple® Remote subsystem correctly, this can lead to the effect that nothing happens when you press a button on your Apple® Remote. For as long as you're running Remote Buddy, issues like this are covered by Remote Buddy and it's driver and are therefore not visible to you. However, as soon as you quit Remote Buddy, the OS X Apple® Remote subsystem is back in control and any issues caused in it by other applications become visible.

Therefore Remote Buddy is neither the cause of the issue nor is it responsible for it. Instead, the cause of the issue exists independently of Remote Buddy. It's located elsewhere and can also only be solved there.

Although our products can't cause any such issues, we're regularly contacted about such issues and asked for help. In order to make locating and fixing the cause of such issues as easy and efficient as possible, we've developed a free diagnostics tool: Remote Control Diagnostics. It can locate issues with a single click and will provide you with information about the issue as well as with instructions on how you can fix it.

Please enter 0000.

There's a bug in the Bluetooth®-stack of OS X® 10.8/10.9 in the context of pairing a Sony® PS3 BD Remote. OS X® 10.8/10.9 will ask you to enter a PIN code when you try to connect your remote control. This problem is known by Apple®.

If you pair your Sony® PS3 BD Remote with your Mac® for the first time

1. Use Remote Buddy's Setup Wizard to pair your remote control
2. Restart your Mac® directly after the pairing was successful, while the remote is still connected.
3. The remote should now work without problems.

If you've already paired the Sony® PS3 BD Remote with your Mac®

1. 10.9 only: Try entering 0000 as PIN and reboot. If you're lucky, that was all you needed to do. If this does not solve your issue, please continue with the steps that follow.
2. First, we'll need to remove the Link Key of your Mac® from the memory of your remote control. Since this remote control can only store one Link Key, it's as easy as pairing the remote control with another Mac®. To do so, open System Preferences > Bluetooth on another Mac® and pair your remote with it.
3. All steps that follow should be performed on the Mac® that you want to use your remote control with.
4. Remove - if it exists - the entry of your remote control at Remote Buddy > Preferences > Hardware ® Bluetooth Receiver. The entry usually is titled "BD Remote".
5. If existant, remove the device "BD Remote" from System Preferences > Bluetooth.
6. Delete the Bluetooth preferences files by entering the following in Terminal.app and hitting return (Warning: this deletes all information about all paired Bluetooth® devices):

   sudo rm /Library/Preferences/com.apple.Bluetooth.plist
   sudo rm ~/Library/Preferences/com.apple.Bluetooth.plist
   sudo rm ~/Library/Preferences/ByHost/com.apple.Bluetooth.*.plist
   

   Please enter your admin password when requested. Then restart your Mac®.
7. Use Remote Buddy's Setup Wizard to pair your remote control
8. Restart your Mac® directly after the pairing was successful, while the remote is still connected.
9. The remote should now work without problems.

1. A respective setting in the energy saving options of the "Bluetooth Receiver" in Remote Buddy - to be found under Preferences > Hardware > Bluetooth Receiver
2. A long press on the PS button of the remote control. The BD Remote does then close the Bluetooth connection by itself
3. Leaving the range of the the remote control
4. A low battery power level
5. A too strong shielding of the Bluetooth® receiver in your Mac® (for example when your Mac® is housed in a shelf or rack). We have one user report of shielding leading to dead spots, in which the Bluetooth® connection breaks together.

1. Please make sure that your computer is equipped with Bluetooth® and that it is active. You can enable and disable Bluetooth® at any time through System Preferences.
2. If you only switch on Bluetooth® occassionally: the Bluetooth® stack used by Apple® does seem to need up to a minute after it has been activated, before it can establish connections to devices. During this time, Bluetooth® appears to be active to applications, but isn't fully there just yet.
3. Please make sure the Bluetooth® Receiver in Remote Buddy is active (green "light" in front of its entry in the menu).
4. Before you can use a Wii™ Remote with Remote Buddy for the first time, you need to pair it through the "Setup Wizard". For pairing, open the "Setup Wizard" of Remote Buddy (you can access it in the pull down menu to be found in your system's menu bar behind the Remote Buddy icon) and follow its instructions. If the pair option is greyed out, use the Setup Wizard to install the Remote Buddy Kernel Extension, first.
5. If a remote control has been connected through the setup wizard once, an active Bluetooth™ Receiver in Remote Buddy and pressing buttons 1 and 2 at the same time are sufficient to establish a connection.
6. If not all four LEDs are blinking when pressing button 1 and 2 - or if they blink with different brightness - your battery may no longer hold enough power for the operation of the remote control. Fresh batteries then solve the problem.
7. If the combination of buttons 1 and 2 does not lead to a successful pairing, you'll find a small red knob after removing the battery door, which, when pressed, will also trigger the pairing.
8. In rare cases (we currently know of only one), the remote control itself needs to be reset. Therefore, remove the batteries for at least 30 seconds, then insert them again and try anew to establish a connection. You may possibly have to pair the remote anew, first.

It's impossible to determine the position of the remote control - and thus also moving the mouse cursor - without at least one of these infrared lightsources.

When using the game console, the so called sensor bar is supplying this IR light source. The name is a bit misleading, as it does not contain any sensors at all, just IR diodes, that emit light in the IR spectrum - which is invisible to the human eye.

If no sensor bar is available to you - or if the IR diodes in it are currently turned off, another infrared light source is required. Infrared radiation is also called heat radiation. Simply said, when there's heat, there's infrared light, too. Using this physical phenomena, you can also use very hot objects as infrared light source - whereas f.ex. tealights and candles are especially predestined. Always make sure to exclude the possibility of a fire and any other risks, when using burning candles, tealights or very hot objects,

An infrared receiver can not be used as infrared lightsource. It can only receive, not emit infrared light.

TV sets and monitors don't create light in the infrared range that would be strong enough, either.

In order to use the infrared mouse mode, you have to point your remote control to the IR lightsource. You can easily check, whether this source is strong enough by having a look at the options of your remote in Remote Buddy's preferences (in the Hardware tab). There, all light sources recognized by the IR sensor are displayed for as long as the IR mouse mode is active.

You can find more information on infrared light on f.ex. Wikipedia (Link to external article).

1. Open "System Preferences"
2. Select "Bluetooth"
3. Click on "Set Up New Device…". The Bluetooth assistant will now open.
4. Click on "Continue" to get beyond the "Introduction" message.
5. Select "Any device" and click "Continue".
6. Now press button 1 and 2 simultaneously on your remote control
7. If the name of your remote control appears on screen, select it from the list and click on "Continue"
8. Continue to click on "Continue" until you are prompted to enter a number on your Bluetooth® device. If you have reached that screen, quit the assistant.
9. Now use Remote Buddy's own "Setup Wizard" to pair your remote with your computer.