Support > Remote Buddy Forum > unwanted wake up with multiple remote controls (User, 01.09.2009 22:29:05) // IOSPIRIT [EN]

Support

All support resources for our products. Here you can find answers to frequently asked questions, discuss with other users, recover a lost license code or file a support request.

Forum closed

This forum was closed and turned into an archive effective April 21, 2018. It is no longer possible to create new topics or reply to existing topics.

Thanks everyone for all the great questions and contributions over the years.

Please use the Contact form to get in touch.

Remote Buddy Forum

Overview

Author

Thread

User

01.09.2009 22:29:05

unwanted wake up with multiple remote controls

This posting is older than 6 months and can contain outdated information.

Hello,

Here is my problem.

I have a Mac mini, running Remote Buddy.
In RB hardware conf., I use the "support for multiple remote control" feature to map logical remotes (for using plex with an Harmony Remote).
Also, "Automatically authorize newly found remotes to control ..." is disabled.

All this stuff works fine.

I have also an iMac and a Macbook with their remotes, all of them having a different ID than the harmony one on the mini.

The problem is that while the mini is sleeping, any button pressed on the iMac or Macbook remotes, the Mac Mini is waking up.

This behavior does not happen when "support for multiple remote control" feature is disable or when Remote buddy is not used ...

Any hints ?
Thanks,
Emeric.

These entries from the FAQ may be relevant to this topic:

Hardware - Apple® Remote

After uninstalling/quitting Remote Buddy, my Mac® no longer reacts to the Apple® Remote. (FAQ015E0241)
To enable you to use all capabilities of the IR Receiver of your Mac®, Remote Buddy is using its own driver. In contrast, all other applications with integrated Apple® Remote support usually use the OS X Apple® Remote subsystem.

As long as you're running Remote Buddy, Remote Buddy and its driver are responsible for turning the received button presses into actions. As soon as you quit Remote Buddy, this task is again handled by the OS X Apple® Remote subsystem.

If other applications don't use the interface to the OS X Apple® Remote subsystem correctly, this can lead to the effect that nothing happens when you press a button on your Apple® Remote. For as long as you're running Remote Buddy, issues like this are covered by Remote Buddy and it's driver and are therefore not visible to you. However, as soon as you quit Remote Buddy, the OS X Apple® Remote subsystem is back in control and any issues caused in it by other applications become visible.

Therefore Remote Buddy is neither the cause of the issue nor is it responsible for it. Instead, the cause of the issue exists independently of Remote Buddy. It's located elsewhere and can also only be solved there.

Although our products can't cause any such issues, we're regularly contacted about such issues and asked for help. In order to make locating and fixing the cause of such issues as easy and efficient as possible, we've developed a free diagnostics tool: Remote Control Diagnostics. It can locate issues with a single click and will provide you with information about the issue as well as with instructions on how you can fix it.

Hardware - Harmony® Smart Control

If I haven't used the Harmony Smart Remote for a few minutes, Remote Buddy does not react to the first button press. (FAQ015E0263)
Please verify that no power saving options are enabled at "Remote Buddy > Preferences > Hardware > Bluetooth Receiver".
When the Harmony Hub connects to my Mac, I'm asked for a PIN. (FAQ015E0262)
Please enter 0000.

Thread-display::

unwanted wake up with multiple remote controls, User, 01.09.2009 22:29:05

Re: unwanted wake up with multiple remote controls, User, 02.09.2009 00:45:11

Remote Buddy
Support
1. Overview
2. Manuals
3. FAQs
4. Forums
1. Lost license code
2. Support inquiry
IOSPIRIT
1. About us
2. Blog
3. Labs
4. Developers
1. Contact
2. Press releases
3. Imprint
4. Jobs