Support > Remote Buddy Forum > List of Compatible Universal Remotes w/ 7 Button Apple Remote (User, 19.12.2009 20:41:32) // IOSPIRIT [EN]

Support

All support resources for our products. Here you can find answers to frequently asked questions, discuss with other users, recover a lost license code or file a support request.

Forum closed

This forum was closed and turned into an archive effective April 21, 2018. It is no longer possible to create new topics or reply to existing topics.

Thanks everyone for all the great questions and contributions over the years.

Please use the Contact form to get in touch.

Remote Buddy Forum

Overview

Author

Thread

User

19.12.2009 20:41:32

List of Compatible Universal Remotes w/ 7 Button Apple Remote

This posting is older than 6 months and can contain outdated information.

Felix, from you review of the new 7 button Apple remote:

"But it comes at a price: hardly any current Universal Remote will be able to correctly learn and emulate the new codes. I fully expect that, instead, they'll just record and replay the raw IR signal of the new buttons. The effect of this will be that one button press on the Universal Remote will be translated into several raw replays of the new Apple® Remote codes. Or, in other words: one button press on the Universal Remote will act like multiple button presses, because that's what'll be sent."

I'm in the process of starting over on my remote setup and would like to utilize the new remote if possible with my Harmony 550 (just to reduce the number of virtual remotes needed) but doubt it's compatible. I've googled and haven't come up with anything on what remotes are compatible as you mention above. Do you happen to know the list?

These entries from the FAQ may be relevant to this topic:

Hardware - Apple® Remote

After uninstalling/quitting Remote Buddy, my Mac® no longer reacts to the Apple® Remote. (FAQ015E0241)
To enable you to use all capabilities of the IR Receiver of your Mac®, Remote Buddy is using its own driver. In contrast, all other applications with integrated Apple® Remote support usually use the OS X Apple® Remote subsystem.

As long as you're running Remote Buddy, Remote Buddy and its driver are responsible for turning the received button presses into actions. As soon as you quit Remote Buddy, this task is again handled by the OS X Apple® Remote subsystem.

If other applications don't use the interface to the OS X Apple® Remote subsystem correctly, this can lead to the effect that nothing happens when you press a button on your Apple® Remote. For as long as you're running Remote Buddy, issues like this are covered by Remote Buddy and it's driver and are therefore not visible to you. However, as soon as you quit Remote Buddy, the OS X Apple® Remote subsystem is back in control and any issues caused in it by other applications become visible.

Therefore Remote Buddy is neither the cause of the issue nor is it responsible for it. Instead, the cause of the issue exists independently of Remote Buddy. It's located elsewhere and can also only be solved there.

Although our products can't cause any such issues, we're regularly contacted about such issues and asked for help. In order to make locating and fixing the cause of such issues as easy and efficient as possible, we've developed a free diagnostics tool: Remote Control Diagnostics. It can locate issues with a single click and will provide you with information about the issue as well as with instructions on how you can fix it.
After updating to OS X 10.6.2, my Apple® Remote is no longer available for selection in Remote Buddy. (FAQ015E0236)
Please update your copy of Remote Buddy to version 1.15 or later.

Hardware - Harmony® Smart Control

How do I set up the Harmony Smart Control and connect it to Remote Buddy on my Mac? (FAQ015E0264)
Please see the detailed HowTo on this topic in our blog.

Which Harmony commands need to be assigned to the respective buttons on the Smart Control so that I can use all buttons with Remote Buddy? (FAQ015E0265)

If I haven't used the Harmony Smart Remote for a few minutes, Remote Buddy does not react to the first button press. (FAQ015E0263)
Please verify that no power saving options are enabled at "Remote Buddy > Preferences > Hardware > Bluetooth Receiver".

Thread-display::

List of Compatible Universal Remotes w/ 7 Button Apple Remote, User, 19.12.2009 20:41:32

Re: List of Compatible Universal Remotes w/ 7 Button Apple Remote, User, 20.12.2009 16:20:46

Re: Re: List of Compatible Universal Remotes w/ 7 Button Apple Remote, User, 08.01.2010 10:29:26

Remote Buddy
Support
1. Overview
2. Manuals
3. FAQs
4. Forums
1. Lost license code
2. Support inquiry
IOSPIRIT
1. About us
2. Blog
3. Labs
4. Developers
1. Contact
2. Press releases
3. Imprint
4. Jobs