Support > Remote Buddy Forum > Applescript to change EyeTV audio options? (User, 20.12.2010 00:28:10) // IOSPIRIT [EN]

Support

All support resources for our products. Here you can find answers to frequently asked questions, discuss with other users, recover a lost license code or file a support request.

Forum closed

This forum was closed and turned into an archive effective April 21, 2018. It is no longer possible to create new topics or reply to existing topics.

Thanks everyone for all the great questions and contributions over the years.

Please use the Contact form to get in touch.

Remote Buddy Forum

Overview

Author

Thread

User

20.12.2010 00:28:10

Applescript to change EyeTV audio options?

This posting is older than 6 months and can contain outdated information.

I don't know if this is a Plex issue or not but it didn't start happening until I upgraded to 9 and the first rule of thumb of troubleshooting is to determine what changed. My setup is and EyeTV Plex running on a Mini 2009 via HDMI and with digital audio out via optical to my receiver. I use a harmony remote and always leave EyeTV running, even when I switch to Plex. I send a command via applescript and RB to close all live tv windows to EyeTV and then switch to Plex. When I quit Plex I send a command to activate EyeTV and open a live TV window. Switching from EyeTV to Plex goes off without a hitch. However, now after upgrading to 9, when I switch back to EyeTV I get no sound. Upon inspecting the EyeTV audio options the audio out has been switched to "System Out" instead of "Digital Out". To fix the issue I simply have to switch it back to "Digital Out" and all is well.

I had been running this setup since May of last year without issue until I upgraded to 9. Any ideas why this is happening? Anyone know of an applescript command to tell EyeTV to automatically set audio to "Digital Out"?

Thanks in advance.

These entries from the FAQ may be relevant to this topic:

General

Can I run Remote Buddy under Windows®? Is there a Windows® version? (FAQ015E0214)
No. Remote Buddy is exclusively and only available for Mac OS® X.

Hardware - Apple® Remote

After uninstalling/quitting Remote Buddy, my Mac® no longer reacts to the Apple® Remote. (FAQ015E0241)
To enable you to use all capabilities of the IR Receiver of your Mac®, Remote Buddy is using its own driver. In contrast, all other applications with integrated Apple® Remote support usually use the OS X Apple® Remote subsystem.

As long as you're running Remote Buddy, Remote Buddy and its driver are responsible for turning the received button presses into actions. As soon as you quit Remote Buddy, this task is again handled by the OS X Apple® Remote subsystem.

If other applications don't use the interface to the OS X Apple® Remote subsystem correctly, this can lead to the effect that nothing happens when you press a button on your Apple® Remote. For as long as you're running Remote Buddy, issues like this are covered by Remote Buddy and it's driver and are therefore not visible to you. However, as soon as you quit Remote Buddy, the OS X Apple® Remote subsystem is back in control and any issues caused in it by other applications become visible.

Therefore Remote Buddy is neither the cause of the issue nor is it responsible for it. Instead, the cause of the issue exists independently of Remote Buddy. It's located elsewhere and can also only be solved there.

Although our products can't cause any such issues, we're regularly contacted about such issues and asked for help. In order to make locating and fixing the cause of such issues as easy and efficient as possible, we've developed a free diagnostics tool: Remote Control Diagnostics. It can locate issues with a single click and will provide you with information about the issue as well as with instructions on how you can fix it.
After updating to OS X 10.6.2, my Apple® Remote is no longer available for selection in Remote Buddy. (FAQ015E0236)
Please update your copy of Remote Buddy to version 1.15 or later.

Hardware - EyeTV Receiver

Which receivers are supported? (FAQ015E0211)
The latest info on hard- and software-requirements including info on support hardware can be found on the dedicated page for EyeTV receivers.

Please consider making use of the free Remote Buddy trial version to test your device for compatibility directly on your computer.

Hardware - Harmony® Smart Control

How do I set up the Harmony Smart Control and connect it to Remote Buddy on my Mac? (FAQ015E0264)
Please see the detailed HowTo on this topic in our blog.

Thread-display::

Applescript to change EyeTV audio options?, User, 20.12.2010 00:28:10

Re: Applescript to change EyeTV audio options?, User, 22.12.2010 22:57:47

Re: Applescript to change EyeTV audio options?, User, 25.12.2010 20:08:46

Re: Applescript to change EyeTV audio options?, User, 15.02.2011 09:46:38

Re: Applescript to change EyeTV audio options?, User, 16.02.2011 04:16:54

Re: Applescript to change EyeTV audio options?, User, 16.02.2011 05:26:44

Remote Buddy
Support
1. Overview
2. Manuals
3. FAQs
4. Forums
1. Lost license code
2. Support inquiry
IOSPIRIT
1. About us
2. Blog
3. Labs
4. Developers
1. Contact
2. Press releases
3. Imprint
4. Jobs