Support > Remote Buddy Forum > Apple remote and EyeTV receiver, no hold button detection (User, 30.05.2014 13:09:02) // IOSPIRIT [EN]

Support

All support resources for our products. Here you can find answers to frequently asked questions, discuss with other users, recover a lost license code or file a support request.

Forum closed

This forum was closed and turned into an archive effective April 21, 2018. It is no longer possible to create new topics or reply to existing topics.

Thanks everyone for all the great questions and contributions over the years.

Please use the Contact form to get in touch.

Remote Buddy Forum

Overview

Author

Thread

User

30.05.2014 13:09:02

Apple remote and EyeTV receiver, no hold button detection

This posting is older than 6 months and can contain outdated information.

Hello.

On the 2013' MacBook Air there are no build in IR receiver.

I've read the FAQ and found that Remote buddy could manage the Apple
remotes
in conjunction with an EyeTV receiver (EyeTV Diversity in my case)
plugged and
the EyeTV software running.

I test it and it work except for two things :
.. The hold state of the buttons is not recognized
.. When I've make a custom action with a keystroke actor, whatever the
setting selected
in the operation listbox, the action seem to Send multiple keypress
between press and
release button

Is this a limitation of the EyeTV receiver or is there problem with my
configuration ?

Regards.

Denis

These entries from the FAQ may be relevant to this topic:

Configuration

How do I add a new action to a Behaviour - f.ex. an emulated key press or AppleScript? (FAQ015E0153)
1) Open the Remote Buddy Preferences via the pulldown-menu and choose "Mapping".
2) Choose the mapping you want to modify.
3) Select "Custom actions" for the button you want to map to an action of your own.
4) Create the action you need using the appearing editor.

Hardware - Apple® Remote

After uninstalling/quitting Remote Buddy, my Mac® no longer reacts to the Apple® Remote. (FAQ015E0241)
To enable you to use all capabilities of the IR Receiver of your Mac®, Remote Buddy is using its own driver. In contrast, all other applications with integrated Apple® Remote support usually use the OS X Apple® Remote subsystem.

As long as you're running Remote Buddy, Remote Buddy and its driver are responsible for turning the received button presses into actions. As soon as you quit Remote Buddy, this task is again handled by the OS X Apple® Remote subsystem.

If other applications don't use the interface to the OS X Apple® Remote subsystem correctly, this can lead to the effect that nothing happens when you press a button on your Apple® Remote. For as long as you're running Remote Buddy, issues like this are covered by Remote Buddy and it's driver and are therefore not visible to you. However, as soon as you quit Remote Buddy, the OS X Apple® Remote subsystem is back in control and any issues caused in it by other applications become visible.

Therefore Remote Buddy is neither the cause of the issue nor is it responsible for it. Instead, the cause of the issue exists independently of Remote Buddy. It's located elsewhere and can also only be solved there.

Although our products can't cause any such issues, we're regularly contacted about such issues and asked for help. In order to make locating and fixing the cause of such issues as easy and efficient as possible, we've developed a free diagnostics tool: Remote Control Diagnostics. It can locate issues with a single click and will provide you with information about the issue as well as with instructions on how you can fix it.
After updating to OS X 10.6.2, my Apple® Remote is no longer available for selection in Remote Buddy. (FAQ015E0236)
Please update your copy of Remote Buddy to version 1.15 or later.

Hardware - EyeTV Receiver

Which receivers are supported? (FAQ015E0211)
The latest info on hard- and software-requirements including info on support hardware can be found on the dedicated page for EyeTV receivers.

Please consider making use of the free Remote Buddy trial version to test your device for compatibility directly on your computer.

Thread-display::

Apple remote and EyeTV receiver, no hold button detection, User, 30.05.2014 13:09:02

Re: Apple remote and EyeTV receiver, no hold button detection, User, 08.06.2014 13:09:01

Re: Apple remote and EyeTV receiver, no hold button detection, User, 08.06.2014 17:39:54

Remote Buddy
Support
1. Overview
2. Manuals
3. FAQs
4. Forums
1. Lost license code
2. Support inquiry
IOSPIRIT
1. About us
2. Blog
3. Labs
4. Developers
1. Contact
2. Press releases
3. Imprint
4. Jobs