Support
All support resources for our products. Here you can find answers to frequently asked questions, discuss with other users, recover a lost license code or file a support request.
Forum closed
This forum was closed and turned into an archive effective April 21, 2018. It is no longer possible to create new topics or reply to existing topics.

Thanks everyone for all the great questions and contributions over the years.

Please use the Contact form to get in touch.

Remote Buddy Forum

Overview 

AuthorThread
User

17.11.2008 02:09:35
Only Volume Down works with Apple remote + Keyspan DMR receiver
View

This posting is older than 6 months and can contain outdated information.
I'm a noob to this application, but I have checked the forums and followed the instructions...

But, it doesn't seem that my mappings are taking. Right 'out of the box' RB allowed the Apple remote to turn down the volume (displaying the RB volume slider). 
After following the instructions on how to use RB as a driver and let the Apple remote behave as if it was packaged with my non-IR G5 PowerMac, now it turns down the system volume showing the default Apple volume display. 
All mappings are set to "virtual xxx" where xxx is copied from the "Retrofitting an AppleŽ Remote" page. 
I've restarted and rebooted but still only Volume Down seems active. 
The remote works 100% on my MBPro.

These entries from the FAQ may be relevant to this topic:

Driver
Hardware - Apple® Remote
User

17.11.2008 21:44:43
Re: Only Volume Down works with Apple remote + Keyspan DMR receiver
View

This posting is older than 6 months and can contain outdated information.
Anyone? 
User

19.11.2008 13:24:16
Re: Only Volume Down works with Apple remote + Keyspan DMR receiver
View

This posting is older than 6 months and can contain outdated information.
Thanks for asking.

All changes you make to settings in Remote Buddy take immediate 
effect. There's no need to reboot.

Please recheck you have really chosen the correct actions for the 
respective buttons in the global mappings table exactly as shown in 
the screenshot. If you need further assistance, please file a support 
inquiry (should you not already have done so), so we can share 
screenshots, etc.

Best regards, 
Felix Schwarz