Support > Remote Buddy Forum > Nintendo RVL-cnt-01-tr disconnected // IOSPIRIT [EN]

Support

All support resources for our products. Here you can find answers to frequently asked questions, discuss with other users, recover a lost license code or file a support request.

Forum closed

This forum was closed and turned into an archive effective April 21, 2018. It is no longer possible to create new topics or reply to existing topics.

Thanks everyone for all the great questions and contributions over the years.

Please use the Contact form to get in touch.

Remote Buddy Forum

Overview

Author

Thread

User

13.04.2014 19:56:05

Nintendo RVL-cnt-01-tr disconnected

View

This posting is older than 6 months and can contain outdated information.

Hi,
i have a iMac 10.9.2.
I would use my Wii Remote Plus with Remote Buddy.
I was able to match the Wii Remote with the mac.
I installed the drivers in the setup wizard.
I managed to make even the combination of the wii remote with remote buddy, but every time you start Remote Buddy after a few seconds I always get the same message: "Nintendo RVL-CNT-01-tr disconnected"
Why? How can I fix?
I'll post a screenshot: http://imageshack.com/a/img850/4196/8bi0.png

thanks

These entries from the FAQ may be relevant to this topic:

Driver

What is the task of the driver and what do I need it for? (FAQ015E0177)
The Setup Wizard already contains a summary on how the driver does help Remote Buddy to provide additional features and hardware support. If that summary was too short, here's some more info on each of the points:
- fix for Apple® Remote driver problems in OS X
  Since OS X 10.4.9 (that includes 10.4.10/10.4.11/10.5.x/..) many users have been experiencing that one button press on their remote does now trigger two reactions - once from any currently running application that supports the Apple® Remote, once the default system action. So, this problem is not specific to Remote Buddy. The driver provides a clean, system conform fix to this problem using only documented APIs.
- enabling of all features of built-in IR receivers
  Only with the Remote Buddy driver do you gain support for arbitrary length button presses for the Play and Menu buttons as well as minimized reaction times for all buttons. While this may sound like unimportant technical details, they actually do have a strong practical impact. If, for example, you want to map a function to the Play or Menu button, that you want to see executed for as long as you press that button, this was previously simply impossible to achieve. This limitation still applies to all other applications. It does not for Remote Buddy with the driver loaded.
- the emulation of a virtual Apple® Remote
  Control applications that have support for and listen to an Apple® Remote - with any remote control of your choice supported by Remote Buddy. And on any Mac®. This allows you to f.ex. use iAlertU side by side with Remote Buddy or accessing special functions and modes inside applications that would otherwise require these apps to have full control over the built-in IR receiver of your Mac® - and that your Mac® actually came with one.
- support for Bluetooth® remotes and external receivers
  It's not possible to reliably operate many Bluetooth® based remotes, like for example the Wii® Remote with a Mac® purely from userspace due to limitations in the operating system. The situation for many external receivers is similiar: some of their features - or the entire device - can only be supported with the help of a driver.

Hardware - Wii™ Remote

I can't connect my Wii™ Remote to Remote Buddy by pressing 1 and 2 together. (FAQ015E0176)
Please go through all of the following points to check your setup for possible errors:
1. Please make sure that your computer is equipped with Bluetooth® and that it is active. You can enable and disable Bluetooth® at any time through System Preferences.
2. If you only switch on Bluetooth® occassionally: the Bluetooth® stack used by Apple® does seem to need up to a minute after it has been activated, before it can establish connections to devices. During this time, Bluetooth® appears to be active to applications, but isn't fully there just yet.
3. Please make sure the Bluetooth® Receiver in Remote Buddy is active (green "light" in front of its entry in the menu).
4. Before you can use a Wii™ Remote with Remote Buddy for the first time, you need to pair it through the "Setup Wizard". For pairing, open the "Setup Wizard" of Remote Buddy (you can access it in the pull down menu to be found in your system's menu bar behind the Remote Buddy icon) and follow its instructions. If the pair option is greyed out, use the Setup Wizard to install the Remote Buddy Kernel Extension, first.
5. If a remote control has been connected through the setup wizard once, an active Bluetooth™ Receiver in Remote Buddy and pressing buttons 1 and 2 at the same time are sufficient to establish a connection.
6. If not all four LEDs are blinking when pressing button 1 and 2 - or if they blink with different brightness - your battery may no longer hold enough power for the operation of the remote control. Fresh batteries then solve the problem.
7. If the combination of buttons 1 and 2 does not lead to a successful pairing, you'll find a small red knob after removing the battery door, which, when pressed, will also trigger the pairing.
8. In rare cases (we currently know of only one), the remote control itself needs to be reset. Therefore, remove the batteries for at least 30 seconds, then insert them again and try anew to establish a connection. You may possibly have to pair the remote anew, first.

User

13.04.2014 21:57:01

Re: Nintendo RVL-cnt-01-tr disconnected

View

This posting is older than 6 months and can contain outdated information.

Thanks for asking.

The Wii Remote *Plus* is currently not supported by Remote Buddy, only the normal Wii Remote.

Problems to get the Wii Remote Plus working and officially supported are
a) that Nintendo sold different hardware versions under the same name ("Wii Remote Plus") and it's not known just how many different versions they released.
b) there's no public information on the number of versions of the Wii Remote Plus
c) the OS X Bluetooth stack appears to have issues with some of these versions of the Wii Remote Plus

Best regards,
Felix Schwarz

Remote Buddy
Support
1. Overview
2. Manuals
3. FAQs
4. Forums
1. Lost license code
2. Support inquiry
IOSPIRIT
1. About us
2. Blog
3. Labs
4. Developers
1. Contact
2. Press releases
3. Imprint
4. Jobs