Support > Remote Buddy Forum > Eye TV recording when activity ended issue (User, 11.01.2015 05:04:34) // IOSPIRIT [EN]

Support

All support resources for our products. Here you can find answers to frequently asked questions, discuss with other users, recover a lost license code or file a support request.

Forum closed

This forum was closed and turned into an archive effective April 21, 2018. It is no longer possible to create new topics or reply to existing topics.

Thanks everyone for all the great questions and contributions over the years.

Please use the Contact form to get in touch.

Remote Buddy Forum

Overview

Author

Thread

User

11.01.2015 05:04:34

Eye TV recording when activity ended issue

This posting is older than 6 months and can contain outdated information.

I have Harmony Remote paired with Remote Buddy controlling Mac Mini, Eye TV, Sony TV and a Yamaha AV receiver. When I turn off the activity by pressing the 'Off' button on the remote, I get a momentary message (it looks like an EyeTV message) at the left top of the screen: "Recording Started", immediately followed by a message: "Recording Stopped". All devices then turn off as they should (that is, the TV and AV receiver - the Mac Mini stays running as it should).This leaves very short recordings in the EyeTV library which I (or more importantly my wife) then have to clean up.

I have not re-assigned the off button in any way, either in Harmony or Remote Buddy. This does not happen if I do not use Remote Buddy. I have assigned all the remote buttons per the How To on the IOSPIRIT website.

Any suggestions?

Cheers

Colin

These entries from the FAQ may be relevant to this topic:

Hardware - Apple® Remote

After uninstalling/quitting Remote Buddy, my Mac® no longer reacts to the Apple® Remote. (FAQ015E0241)
To enable you to use all capabilities of the IR Receiver of your Mac®, Remote Buddy is using its own driver. In contrast, all other applications with integrated Apple® Remote support usually use the OS X Apple® Remote subsystem.

As long as you're running Remote Buddy, Remote Buddy and its driver are responsible for turning the received button presses into actions. As soon as you quit Remote Buddy, this task is again handled by the OS X Apple® Remote subsystem.

If other applications don't use the interface to the OS X Apple® Remote subsystem correctly, this can lead to the effect that nothing happens when you press a button on your Apple® Remote. For as long as you're running Remote Buddy, issues like this are covered by Remote Buddy and it's driver and are therefore not visible to you. However, as soon as you quit Remote Buddy, the OS X Apple® Remote subsystem is back in control and any issues caused in it by other applications become visible.

Therefore Remote Buddy is neither the cause of the issue nor is it responsible for it. Instead, the cause of the issue exists independently of Remote Buddy. It's located elsewhere and can also only be solved there.

Although our products can't cause any such issues, we're regularly contacted about such issues and asked for help. In order to make locating and fixing the cause of such issues as easy and efficient as possible, we've developed a free diagnostics tool: Remote Control Diagnostics. It can locate issues with a single click and will provide you with information about the issue as well as with instructions on how you can fix it.

Hardware - EyeTV Receiver

Which receivers are supported? (FAQ015E0211)
The latest info on hard- and software-requirements including info on support hardware can be found on the dedicated page for EyeTV receivers.

Please consider making use of the free Remote Buddy trial version to test your device for compatibility directly on your computer.

Hardware - Harmony® Smart Control

Which Harmony commands need to be assigned to the respective buttons on the Smart Control so that I can use all buttons with Remote Buddy? (FAQ015E0265)

If I haven't used the Harmony Smart Remote for a few minutes, Remote Buddy does not react to the first button press. (FAQ015E0263)
Please verify that no power saving options are enabled at "Remote Buddy > Preferences > Hardware > Bluetooth Receiver".

Thread-display::

Eye TV recording when activity ended issue, User, 11.01.2015 05:04:34

Re: Eye TV recording when activity ended issue, User, 11.01.2015 11:24:01

Re: Eye TV recording when activity ended issue, User, 12.01.2015 10:14:51

Remote Buddy
Support
1. Overview
2. Manuals
3. FAQs
4. Forums
1. Lost license code
2. Support inquiry
IOSPIRIT
1. About us
2. Blog
3. Labs
4. Developers
1. Contact
2. Press releases
3. Imprint
4. Jobs