To enable you to use all capabilities of the IR Receiver of your Mac®, Remote Buddy is using its own driver. In contrast, all other applications with integrated Apple® Remote support usually use the OS X Apple® Remote subsystem.

As long as you're running Remote Buddy, Remote Buddy and its driver are responsible for turning the received button presses into actions. As soon as you quit Remote Buddy, this task is again handled by the OS X Apple® Remote subsystem.

If other applications don't use the interface to the OS X Apple® Remote subsystem correctly, this can lead to the effect that nothing happens when you press a button on your Apple® Remote. For as long as you're running Remote Buddy, issues like this are covered by Remote Buddy and it's driver and are therefore not visible to you. However, as soon as you quit Remote Buddy, the OS X Apple® Remote subsystem is back in control and any issues caused in it by other applications become visible.

Therefore Remote Buddy is neither the cause of the issue nor is it responsible for it. Instead, the cause of the issue exists independently of Remote Buddy. It's located elsewhere and can also only be solved there.

Although our products can't cause any such issues, we're regularly contacted about such issues and asked for help. In order to make locating and fixing the cause of such issues as easy and efficient as possible, we've developed a free diagnostics tool: Remote Control Diagnostics. It can locate issues with a single click and will provide you with information about the issue as well as with instructions on how you can fix it.

Please verify that no power saving options are enabled at "Remote Buddy > Preferences > Hardware > Bluetooth Receiver".

The table that follows lists the commands the Harmony software assigns to the respective buttons by default - and how these need to be changed for Remote Buddy. For Remote Buddy, the commands for short and long button presses should always be identical.

Here's where and how you can make the changes:

Please enter 0000.

There's a bug in the Bluetooth®-stack of OS X® 10.8/10.9 in the context of pairing a Sony® PS3 BD Remote. OS X® 10.8/10.9 will ask you to enter a PIN code when you try to connect your remote control. This problem is known by Apple®.

If you pair your Sony® PS3 BD Remote with your Mac® for the first time

1. Use Remote Buddy's Setup Wizard to pair your remote control
2. Restart your Mac® directly after the pairing was successful, while the remote is still connected.
3. The remote should now work without problems.

If you've already paired the Sony® PS3 BD Remote with your Mac®

1. 10.9 only: Try entering 0000 as PIN and reboot. If you're lucky, that was all you needed to do. If this does not solve your issue, please continue with the steps that follow.
2. First, we'll need to remove the Link Key of your Mac® from the memory of your remote control. Since this remote control can only store one Link Key, it's as easy as pairing the remote control with another Mac®. To do so, open System Preferences > Bluetooth on another Mac® and pair your remote with it.
3. All steps that follow should be performed on the Mac® that you want to use your remote control with.
4. Remove - if it exists - the entry of your remote control at Remote Buddy > Preferences > Hardware ® Bluetooth Receiver. The entry usually is titled "BD Remote".
5. If existant, remove the device "BD Remote" from System Preferences > Bluetooth.
6. Delete the Bluetooth preferences files by entering the following in Terminal.app and hitting return (Warning: this deletes all information about all paired Bluetooth® devices):

   sudo rm /Library/Preferences/com.apple.Bluetooth.plist
   sudo rm ~/Library/Preferences/com.apple.Bluetooth.plist
   sudo rm ~/Library/Preferences/ByHost/com.apple.Bluetooth.*.plist
   

   Please enter your admin password when requested. Then restart your Mac®.
7. Use Remote Buddy's Setup Wizard to pair your remote control
8. Restart your Mac® directly after the pairing was successful, while the remote is still connected.
9. The remote should now work without problems.

These settings are recommended:

General

Search for paired remotes on startup: On.
Stop searching for paired remotes after max .. minutes: Off.
Display pairing instructions and status messages: Off. If you experience problems, you should turn this option back on to aid you in debugging the problem.

Energy saving

Automatically disconnect remotes after inactivity of more than .. minute(s): On, value of 1 minute.
Disconnect remotes when computer goes to sleep: On. The potential power saving with this option is huge. But as the warning says, this will not work with all computers: if you can't wake up your computer with your remote after turning this option on, please turn it off again.

The AJAX Remote of Remote Buddy, which you can view and use through your the browser on your iPhone™, works over TCP/IP and HTTP. The iPhone™ does only support these standards over WLAN and EDGE at this point, not via Bluetooth®. Please connect your iPhone™ to the same WLAN as your Mac®, then follow these instructions:

http://www.iospirit.com/products/remotebuddy/guides/ajaxremotesetup/

The Setup Wizard has been exclusively designed and developed for Bluetooth® remote controls, not mobile phones.

Please understand, though, that we don't talk about future products or plans prior to to their close-to-complete-realization or release.

If you want to stay up to date on this topic, we recommend to follow us on Twitter or subscribe to our newsletter or RSS feed (find all links at the footer of the product page). News will be available here, first.