Support > Remote Buddy Forum > How to import a plex keymap into the Plex behaviour (User, 05.11.2014 14:37:48) // IOSPIRIT [EN]

Support

All support resources for our products. Here you can find answers to frequently asked questions, discuss with other users, recover a lost license code or file a support request.

Forum closed

This forum was closed and turned into an archive effective April 21, 2018. It is no longer possible to create new topics or reply to existing topics.

Thanks everyone for all the great questions and contributions over the years.

Please use the Contact form to get in touch.

Remote Buddy Forum

Overview

Author

Thread

User

05.11.2014 14:37:48

How to import a plex keymap into the Plex behaviour

This posting is older than 6 months and can contain outdated information.

Hello all,

I have been struggling with my Harmony One/ Plex/ Remote Buddy/ Mac Mini setup.
I have followed the mac mini harmony blog as best as I can: http://miniharmony.blogspot.nl/ but I get stuck at assigning the buttons on my harmony.
I have a few standard ones that i found after installation but I have no idea how to add the rest.
a few screenshots to illustrate my question:
http://prntscr.com/5399xb this is the global mapping where i added the "activate Plex behaviour" as mentioned in the mini harmony blog
http://prntscr.com/539afc in the Plex behaviour only a few standard commands are represented and they are the same in all the virtual apple remotes
http://prntscr.com/539at9 In behaviours the Plex behaviour is empty is that correct?
http://prntscr.com/539b6g this is how the mini harmony blog says the plex keymap should look, how do i get it in remote buddy?

Many thanks for your time,
greetings,
olav

These entries from the FAQ may be relevant to this topic:

Hardware - Apple® Remote

After uninstalling/quitting Remote Buddy, my Mac® no longer reacts to the Apple® Remote. (FAQ015E0241)
To enable you to use all capabilities of the IR Receiver of your Mac®, Remote Buddy is using its own driver. In contrast, all other applications with integrated Apple® Remote support usually use the OS X Apple® Remote subsystem.

As long as you're running Remote Buddy, Remote Buddy and its driver are responsible for turning the received button presses into actions. As soon as you quit Remote Buddy, this task is again handled by the OS X Apple® Remote subsystem.

If other applications don't use the interface to the OS X Apple® Remote subsystem correctly, this can lead to the effect that nothing happens when you press a button on your Apple® Remote. For as long as you're running Remote Buddy, issues like this are covered by Remote Buddy and it's driver and are therefore not visible to you. However, as soon as you quit Remote Buddy, the OS X Apple® Remote subsystem is back in control and any issues caused in it by other applications become visible.

Therefore Remote Buddy is neither the cause of the issue nor is it responsible for it. Instead, the cause of the issue exists independently of Remote Buddy. It's located elsewhere and can also only be solved there.

Although our products can't cause any such issues, we're regularly contacted about such issues and asked for help. In order to make locating and fixing the cause of such issues as easy and efficient as possible, we've developed a free diagnostics tool: Remote Control Diagnostics. It can locate issues with a single click and will provide you with information about the issue as well as with instructions on how you can fix it.
After updating to OS X 10.6.2, my Apple® Remote is no longer available for selection in Remote Buddy. (FAQ015E0236)
Please update your copy of Remote Buddy to version 1.15 or later.

Hardware - Harmony® Smart Control

How do I set up the Harmony Smart Control and connect it to Remote Buddy on my Mac? (FAQ015E0264)
Please see the detailed HowTo on this topic in our blog.

Which Harmony commands need to be assigned to the respective buttons on the Smart Control so that I can use all buttons with Remote Buddy? (FAQ015E0265)

When the Harmony Hub connects to my Mac, I'm asked for a PIN. (FAQ015E0262)
Please enter 0000.
If I haven't used the Harmony Smart Remote for a few minutes, Remote Buddy does not react to the first button press. (FAQ015E0263)
Please verify that no power saving options are enabled at "Remote Buddy > Preferences > Hardware > Bluetooth Receiver".

Thread-display::

How to import a plex keymap into the Plex behaviour, User, 05.11.2014 14:37:48

Re: How to import a plex keymap into the Plex behaviour, User, 06.11.2014 00:34:15

Re: How to import a plex keymap into the Plex behaviour, User, 06.11.2014 13:30:22

Re: How to import a plex keymap into the Plex behaviour, User, 06.11.2014 16:50:01

Re: How to import a plex keymap into the Plex behaviour, User, 07.11.2014 00:32:47

Re: How to import a plex keymap into the Plex behaviour, User, 10.11.2014 15:22:51

Remote Buddy
Support
1. Overview
2. Manuals
3. FAQs
4. Forums
1. Lost license code
2. Support inquiry
IOSPIRIT
1. About us
2. Blog
3. Labs
4. Developers
1. Contact
2. Press releases
3. Imprint
4. Jobs